Memory Configurations - HP SignagePlayer mp8200 Quickspecs

Hp signageplayer mp8200: specifications
Hide thumbs Also See for SignagePlayer mp8200:
Table of Contents

Advertisement

QuickSpecs
Standard Features and Configurable Components (availability may vary by country)
System Memory Support
System Memory Support
System Memory Support
System Memory Support
The HP SignagePlayer mp8200 Series supports the 2nd generation Intel® Core™ processor family. Based on a new PC micro-
architecture, the processor is designed for a two-chip platform consisting of a processor and Platform Controller Hub (PCH).
Unlike previous generations, the processor includes an integrated memory controller (IMC). The IMC supports DDR3 protocols
with two independent, 64-bit wide channels each accessing one or two DIMMs.
Two channels of non-ECC unbuffered DDR3 memory with a maximum of two UDIMMs or SODIMMs per channel
Single-channel and dual-channel memory organization modes
Data burst length of eight for all memory organization modes
DDR3 memory data transfer rates of 1066 MT/s (PC3-8500) and 1333 MT/s (PC3-10600)
64-bit wide channels
DDR3 I/O voltage of 1.5V
Maximum memory bandwidth of 10.6 GB/s in single-channel mode or 21 GB/s in dual-channel mode assuming DDR3
1333 MT/s (PC3-10600)
1GB and 2GB DDR3 DRAM technologies are supported. Using 4 GB device technologies, the largest memory capacity
possible is 32 GB, assuming dual channel mode with four x 8 GB dual ranked unbuffered DIMM memory configuration.
CAUTION:
CAUTION: You must shut down the computer and disconnect the power cord before adding or removing memory modules.
CAUTION:
CAUTION:
Regardless of the power-on state, voltage is always supplied to the memory modules as long as the computer is plugged in to
an active AC outlet. Adding or removing memory modules while voltage is present may cause irreparable damage to the
memory modules or system board.

Memory Configurations:

Memory Configurations:
Memory Configurations:
Memory Configurations:
Upgradeable to 4 GB. Slot 1 is black and must always be populated. Not all memory configurations possible are represented
below.
Total Memory
Total Memory
Total Memory
Total Memory
2 GB
2 GB
2 GB
2 GB
(dual channel)
(dual channel)
(dual channel)
(dual channel)
4 GB
4 GB
4 GB
4 GB
(dual channel)
(dual channel)
(dual channel)
(dual channel)
NOTE:
NOTE:
NOTE:
NOTE:
For systems configured with more than 3 GB of memory and a 32-bit operating system, all memory may not be available due to
system resource requirements. The mp8200s hardware and BIOS supports up to 4GB however a maximum of 2GB is available to
the operating system.
NOTE:
NOTE:
NOTE:
NOTE:
The Intel Q67 Express chipset includes a built-in Management Engine (ME), which allocates memory for manageability functions.
Management Engine memory is shared with system memory. If the PC contains a single SO-DIMM, 16 MB of memory is pre-
allocated for it at system startup. If the PC contains two SO-DIMMs, 32 MB of memory is pre-allocated. This memory is not made
available to the operating system, just as pre-allocated video memory is not available.
Storage
Storage
Storage
Storage
Channel A (black)
Channel A (black)
Channel A (black)
Channel A (black)
mp8200s and mp8200
mp8200s and mp8200
mp8200s and mp8200
mp8200s and mp8200
(waiting for image)
(waiting for image)
(waiting for image)
(waiting for image)
DA - 14115
North America — Version 2 — October 28, 2011
HP SignagePlayer mp8200 Series
HP SignagePlayer mp8200 Series
HP SignagePlayer mp8200 Series
HP SignagePlayer mp8200 Series
Socket
Socket
Socket
Socket
1 GB
1 GB
1 GB
1 GB
2 GB
2 GB
2 GB
2 GB
Channel B (black)
Channel B (black)
Channel B (black)
Channel B (black)
1 GB
1 GB
1 GB
1 GB
2 GB
2 GB
2 GB
2 GB
Page 5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Signageplayer mp8200s

Table of Contents