Wilson Electronics WEBOOST DRIVE X OTR Installation Manual page 6

______
(STEP 1 cont.)
cable
from antenna
Mast
Extension
OTR
Antenna
Mast
Extension
OR
Antenna
cable
3
Mast
Extension
Side Exit
Adapter
VEHICLE SIGNAL BOOSTER DRIVE X OTR
Once you have determined the
best location for the antenna
and have determined if mast
extensions are needed, insert
cable through mast.
NOTE: Mast Extensions may not be
needed depending on your mounting
point.
If using mast extension(s) add
thread locker (packets provided)
to thread point(s). Screw into
place.
NOTE: Be sure the antenna is the correct
height before applying thread locker.
Add thread locker (packets
provided) to thread point and
screw on the side exit adapter.
NOTE: When adding the side exit adapter
hold the antenna vertically and screw the
adapter from the bottom up. This reduces
cable twisting.