Wilson Electronics WEBOOST DRIVE X OTR Installation Manual page 5

Cellular booster for trucks
Table of Contents

Advertisement

______
Step 1: Select Mounting
Location & Assemble The
Antenna
Select mounting location on vehicle. The antenna can be
mounted in any CB mount or antenna mounting point on the
vehicle. For best performance mount the antenna above the
metal cab (it does not need to be above cab wind deflector).
Depending on the type of truck, there may be built-in antenna
mounting points. If the vehicle does not have built-in mounting
points, the antenna includes a 3-way mount that will work on
vehicles with mirror rails. The antenna will also work with third
party CB antenna mounts.
NOTE: Mount at least 12 inches from any other antennas. Free of obstructions.
NOTE: If the vehicle is using two CB antennas co-phase wiring, removing one
antenna will cause reduced performance of the remaining CB antenna.
Typical Antenna
Mounting Points
2
DRIVE X OTR VEHICLE SIGNAL BOOSTER

Advertisement

Table of Contents
loading

This manual is also suitable for:

460021

Table of Contents