BWI Eagle AIR-EAGLE XLT Product Information Bulletin

AIR-EAGLE
900 MHz RF Receiver
MODEL 441P-8-ESTOP-DC
DESCRIPTION
The A -E XLT is an RF system designed for long range wireless
IR AGLE
remote control of electrical apparatus in a variety of industrial applications.
This receiver has been specifically designed for E-Stop applications. It
links with an E-stop transmitter for failsafe operation. Dip switches allow
the user to select link-loss shutdown times, relay operation and whether
power must be recycled to reset the system. The relays can switch up to 5
amps @120VAC or 30VDC and can be directly interfaced with the
customer's equipment or P.L.C. Seven user selectable frequencies allow
multiple systems to be used in the same area. This receiver is capable of
receiving remote signals transmitted from up to 2500 feet away.
INSTALLATION
DISCONNECT DC Power from all equipment before installation.
1. Mount the A -E XLT R
IR AGLE
2. Select options & frequency (See OPTIONS & FREQUENCY SET-
UP)
3. Install relay wiring to terminal strip.
4. Install antenna onto connector located on the right side on the
enclosure.
5. Connect supplied power input cable to your external power source.
TERMINAL STRIP WIRING
1 N/O Relay #1 7 N/O Relay #3
2 C Relay #1 8 C Relay #3
3 N/C Relay #1 9 N/C Relay #3
4 N/O Relay #2 10 N/O Relay #4
5 C Relay #2 11 C Relay #4
6 N/C Relay #2 12 N/C Relay #4
GENERAL OPERATION
Prior to operation the user selects various options that control the link-loss
shutdown, relay activation and system reset. (See OPTIONS &
FREQUENCY SET-UP).
When power is applied to the receiver, all relays will be in their de-
energized state. When power is applied to the E-stop transmitter, it
immediately begins sending a beacon signal that causes all relays in the
receiver to energize, indicating the communications link. Upon an E-stop
command, the selected relays immediately de-energize. Upon specified
link-loss time, the selected relays de-energize. The system will then need
to be manually reset or will automatically come back online as designated
by the system operation option selected.
105 Bonnie Drive
Butler, PA 16002
724-283-4681
724-283-5939 (fax)
www.bwieagle.com
® XLT
in a convenient location.
ECEIVER
13 (-) 9-36VDC INPUT
14 (+) 9-36VDC INPUT
PRODUCT INFORMATION
BULLETIN
Dimensions (with mounting plate) 6.3" L x 4.8" W x 2.3" H
CONTROLS AND INDICATORS
LED1 Illuminated when power is applied to receiver
LED2 Illuminated when relay #1 is energized
LED3 Illuminated when relay #2 is energized
LED4 Illuminated when relay #3 is energized
LED5 Illuminated when relay #4 is energized
RF module that receives data from the remote
RF1
transmitter
REL1 thru REL4 Four SPDT output control relays
.