Download Print this page

BWI Eagle AIR-EAGLE XLT Product Information Bulletin

900 mhz rf transmitter
Hide thumbs Also See for AIR-EAGLE XLT:

Advertisement

Quick Links

AIR-EAGLE
900 MHz RF Transmitter
MODEL 441-HH-1
DESCRIPTION
The A
-E
XLT TX
s a handheld R.F. transmitter capable of
IR
AGLE
I
sending a unique digital command to an Air-Eagle XLT Receiver
located up to 2500 feet away. The TXs and RXs can be combined in
any quantity to create a long-range radio frequency system that
operates hazardous or hard-to-reach electrical apparatus from safe,
convenient locations. Seven user-selectable frequencies allow multiple
systems to operate simultaneously in the same area without
interference. This transmitter will automatically go into "sleep" mode
when not in use to dramatically extend battery life.
INITIAL OPERATION & SET-UP
This transmitter comes ready to operate, with batteries installed, and
factory programmed to Frequency #1. No setup is necessary unless you
wish to change the frequency or any of the other user programmable
options (See FREQUENCY PROGRAMMING, RELAY PROGRAMMING,
AND TRANSMITTING MODE SETUP on pages 2 & 3).
SPECIFICATIONS
Battery Life
(Sleep Mode)
Transmit Frequency
Transmit Channels
RF Output Power
Transmit Range
Operating Temperature
Keypad
Enclosure
Protective Ring
Power Requirements
Battery Type
*Note: Current relay and frequency settings are maintained in
flash memory during battery replacement. No reprogramming
of user settings is necessary!
Battery Life
(Active Usage)
105 Bonnie Drive
Butler, PA 16002
724-283-4681
724-283-5939 (fax)
www.bwieagle.com
XLT
®
Up to 1 Year
900 MHz Spread Spectrum
Seven Independent Network
Frequencies
250 mW
Approximately 2500 Feet – at full
power
-40
o
F to +185
o
F
Durable Sealed Membrane Keypad –
Eliminates Dust, Dirt and Moisture
Failures
Enclosure with
ABS UL94 HB
ring is rated IP54
SEBS (TPE)
*Not Waterproof
3.0 VDC
(2) 1.5V lithium each, size AAA, to
equal 3.0VDC nominal.
Up to 3 months
PRODUCT INFORMATION
BULLETIN
Dimensions – 4.25" L x 2.68" W x .91" D
(note: belt clip adds .43" to depth)
CONTROLS & INDICATORS
Illuminates continuously while button is
depressed, and unit is transmitting. When this
TX LED
LED blinks briefly following a transmission, the
battery needs to be replaced. See note*
Pushbutton
Transmits an individual RF code to the receiver
APPROVALS
United States (FCC)
Canada (IC)
LIMITED WARRANTY STATEMENT
BWI Eagle Inc. warrants the Air-Eagle Remote Control System, if properly used and
installed, will be free from defects in material and workmanship for a period of 1 year
after date of purchase. Said warranty to include the repair or replacement of defective
equipment. This warranty does not cover damage due to external causes, including
accident, problems with electrical power, usage not in accordance with product
instructions, misuse, neglect, alteration, repair, improper installation, or improper
testing. This warranty also does not cover water damage to any handheld transmitter.
This limited warranty, and any implied warranties that may exist under state law,
apply only to the original purchaser of the equipment, and last only for as long as
such purchaser continues to own the equipment. This warranty replaces all other
warranties, express or implied including, but not limited to, the implied warranties or
merchantability and fitness for a particular purpose. BWI Eagle makes no express
warranties beyond those stated here. BWI disclaims without limitation, implied
warranties of merchantability and fitness for a particular purpose. Some jurisdictions
do not allow the exclusion of implied warranties so this limitation may not apply to
you. To obtain warranty service, contact BWI Eagle for a return material
authorization. When returning equipment to BWI Eagle, the customer assumes the
risk of damage or loss during shipping and is responsible for the shipping costs
incurred.
MCQ-XB900HP
1846A-XB900HP

Advertisement

loading

Summary of Contents for BWI Eagle AIR-EAGLE XLT

  • Page 1 F to +185 Durable Sealed Membrane Keypad – BWI Eagle Inc. warrants the Air-Eagle Remote Control System, if properly used and Eliminates Dust, Dirt and Moisture installed, will be free from defects in material and workmanship for a period of 1 year...
  • Page 2 RELAY PROGRAMMING AIR-EAGLE ® 900 MHz RF Transmitter Please read through these instructions completely before beginning programming procedure! MODEL 441-HH-1 All transmitters are set to operate Relay #1 in the remote receiver by default. The relay to be operated can be changed at any time by following the procedure below.
  • Page 3 AIR-EAGLE ® 900 MHz RF Transmitter MODEL 441-HH-1 TRANSMITTING MODE SETUP The transmitter can be set to be in a standard transmission mode or in a repeater mode where all receivers will repeat the transmission. NOTE: When setting up the transmitting mode, the LED will cycle through the indications for all the other set up options (frequency, relay selection, power level) before it gets to the point where you can select the transmission mode That’s why in the directions below you’ll see that you...

This manual is also suitable for:

441-hh-1