BWI Eagle AIR-EAGLE XLT Manual
900 mhz rf receiver
Hide thumbs
Also See for AIR-EAGLE XLT:
- Manual (9 pages) ,
- Product information bulletin (4 pages) ,
- Product information bulletin (3 pages)
Related Manuals for BWI Eagle AIR-EAGLE XLT
Summary of Contents for BWI Eagle AIR-EAGLE XLT
- Page 1 AIR-EAGLE XLT 44UL-2000-DC 900 MHz RF Receiver SGS Certification # SGSNA/19/SUW/00017 Document Date: 10/19/2021 Product Rev: 6...
-
Page 2: Warranty Statement
44UL-2000-DC WARRANTY STATEMENT BWI Eagle Inc. warrants the Air-Eagle Remote Control System, if properly used and installed, will be free from defects in material and workmanship for a period of 1 year after date of purchase. Said warranty to include the repair or replacement of defective equipment. This warranty does not cover damage due to external causes, including accident, problems with electrical power, usage not in accordance with product instructions, misuse, neglect, alteration, repair, improper installation, or improper testing. - Page 3 SGS testing is designed to ensure products always operate safely, even under extreme circumstances. The AIR-EAGLE XLT is an SGS certified RF system designed for medium to long range wireless remote control of electrical apparatus in a variety of industrial applications. Systems can consist of any number of receivers and handheld or contact input transmitters working together.
-
Page 4: Installation
44UL-2000-DC INSTALLATION Please read through this document in its entirety before proceeding with installation. 1. DISCONNECT power from all equipment before proceeding with installation. 2. Mount the control unit in a suitable location that allows the user to easily remove the lid of the enclosure for wiring access. - Page 5 44UL-2000-DC Page 4...
-
Page 6: Controls And Indicators
44UL-2000-DC CONTROLS & INDICATORS Dual color LED. Illuminates red while receiver is booting up; changes to POWER/TX green when boot-up is successful and unit is ready to operate. If this LED LED1 fails to turn green, power unit off for 15-20 seconds, then reapply power. LED2 Illuminates green while relay 1 is energized LED3... - Page 7 44UL-2000-DC RELAY MODES OF OPERATION Auto Reset (Maintained Momentary) When signal is received from an authorized transmitter, the relay will energize. The relay will maintain the energized state as long as the transmitter is sending the signal. The relay de-energizes when the transmitted signal stops.
-
Page 8: Specifications
44UL-2000-DC SPECIFICATIONS 10 – 24 VDC @ 10 Watts DC Power Input Relay Contacts SPDT 5 amp @ 120VAC or 30VDC per channel Fuse Protected 2 amp Receiver Frequency 900 MHz Spread Spectrum Receiver Range Up to 2500 feet Note: Range figures are estimates, based on free-air terrain with limited sources of interference. Actual range will vary based on transmitting power, orientation of transmitter and receiver, height of transmitting antenna, height of receiving antenna, weather conditions, interference sources in the area, and terrain between receiver and transmitter, including, but not limited to, indoor and outdoor... - Page 9 STANDARD ANTENNA (INCLUDED) 900MHz TNC Portable “Rubber Duck” Antenna 49-1103 MOBILE/BASE ANTENNAS (OPTIONAL) Used to help achieve max range in non-line-of-sight and line-of-sight applications. Contact BWI Eagle for recommendations. 900MHz Thru-Hole/Bracket Mount Mobile Antenna 49-2101 900MHz Magnet Mount Mobile Antenna 49-2102...
- Page 10 44UL-2000-DC Blank Page 9...