Paging - PROEL DBE108E User Manual

4

PAGING

Generic announcement from DBE108E microphone station.
By pressing on the "PAGING" label, the corresponding page will open and all the enabled buttons of the
connected Evac units will be displayed. If more than 4 Evac units are connected, to view all the zone keys, it
will be necessary to scroll the window using the vertical Touch bar or simply using the two capacitive keys
"UP" and "DOWN".
Note: in the PAGING function, the announcement can be sent to a single zone or to groups of zones. By
clicking on the zone buttons of one or more Evac units they will take on a lighter color tone and by keeping the
"TALK" button pressed, the announcement will be reproduced from microphone.
When the "TALK" button is released, the Evac units will remain selected for about 30 seconds: anyway, they
can be deselected in any moment by pressing the zone buttons again or the "CANCEL" button.
Note: in the case of several DBE108E bases connected in the network, if a base is sending a Paging message
on one zone or more zones, in the other connected Bases (always at Paging level) the zone buttons of the
entire control units involved will be gray, to indicate that are in use, and it will not be possible to announce on
these exchanges until the other operator has finished.
However, if another base is used in "LIVE EVAC", "EVAC Msg" or "ALERT Msg" it will have priority, thus going
to by-pass the base in use in "PAGING" mode.
19