To make the settings effective, before selecting another Evac unit or configuring another button from the
drop-down menu, press the "STORE" button.
CONFIGURATION OF A GROUP
The microphone console has 8 call GROUPS which can be called up directly from the buttons on the panel.
By pressing the GROUP "n" button, all the zone buttons previously associated with that group will be
automatically selected: at this point you can proceed with the desired call or message operation.
To associate a zone button to a group, after selecting the "BUTTON", proceed by selecting the desired group
from the "GROUP" menu.
After assigning the button to the group, press the "STORE" button to store the setting.
If it is necessary to cancel only the programming of the Groups without reprogramming the entire base, use
the "CLEAR GROUP" button in the "STATUS" window.
IMPORTANT: the "CLEAR GROUP" function deletes all groups!
14