Use Of The Microphone Station - PROEL DBE108E User Manual

USE OF THE MICROPHONE STATION

Once the configuration is complete, the base must be turned off and on again using the power connector
without pressing any button. In this way, the base will work in standard mode for the end user.
To facilitate the user, the DBE108E allows you to make an emergency call, paging or play messages on all
zones without operating on the touch-screen display:
EMERGENCY CALL
+
EVACUATION MESSAGE
+
ALERT MESSAGE
+
PAGING CALL
+
GROUP CALL
+
CALL CANCELLATION
Press the LIVE EVAC button and then the TALK button.
In this way the microphone is "opened" on all the
zones of all the Evac units in the network.
Press the EVAC MESSAGE button and then the TALK
button. The evacuation message is reproduced on all
zones of all Evac units in the network.
Note: the message reproduced is the one present inside
each Evac unit in the network.
Press the ALERT MESSAGE button and then the TALK
button. The alert message is reproduced on all zones of
all Evac units in the network.
Note: the message reproduced is the one present inside
each Evac unit in the network.
Press the PAGING key and then the TALK key. In this
way the microphone is "opened" on all the zones of all
the Evac units in the network.
Press the button of the group of zones on which you
want to make the call and then the TALK key. In this
way the microphone is "opened" on all the zones of the
group programmed as per the previous chapter.
Note: this is valid only with PAGING window selected on
display, in case the selected page is LIVE EVAC, EVAC
MSg, ALERT MSg the respective microphone or
message is sent to all zones of the Evac unit which has
at least one zone in the group.
"CANCEL" button for canceling the zones selected for
the call. After 30 seconds the zones will be deselected
anyway.
15