Ending A Call; Using Hold And Resume - Cisco 7961G-GE Phone Manual

Ending a Call

To end a call, hang up. See the following table for details.
If you want to...
Hang up while using the handset
Hang up while using the headset
Hang up while using the speakerphone Press
Hang up one call but preserve another
call on the same line

Using Hold and Resume

Only one call can be active at any given time; all other calls will be placed on hold.
If you want to...
Put a call on hold
Remove a call from
hold on the current line
Remove a call from
hold on a different line
Tips
• Engaging the Hold feature typically generates music or a beeping tone.
• A held call is indicated by the call-on-hold icon:
28
Then...
Return the handset to its cradle. Or press EndCall.
Press
EndCall.
Press EndCall. If necessary, remove the call from hold first.
Then...
1. Make sure the call you want to put on hold is highlighted.
2. Press Hold.
1. Make sure that the appropriate call is highlighted.
2. Press Resume.
Press for the appropriate line.
If a single call holding on this line, the call automatically resumes. If
multiple calls are holding, scroll to the appropriate call and press Resume.
. If you want to keep headset mode activate, press
or EndCall.
.
OL-7762-02