Advertisement
PREPARATION AND UNPACKING
The materials composing the packaging are not toxic
The materials composing the packaging are not toxic
or harmful, therefore no particular disposal processes
or harmful, therefore no particular disposal processes
are required.
are required.
Storage, disposal and any recycling is the responsi-
Storage, disposal and any recycling is the responsi-
bility of the end user in compliance with the laws in
bility of the end user in compliance with the laws in
force on the matter.
force on the matter.
You are recommended to make each
movement in a vertical position with suita-
ble devices, paying attention to the safety
standards in force.
Do not overturn the packaging and be cau-
tious when assembling parts.
HANDLING RINGS
rings have been fixed to the sides of the
hearth so as to facilitate transportation of the
monobloc. Insert two steel rodsinto the rings.
PLEASE NOTE Do not overturn
8
the product
INSTALLATION
DETACH THE PRODUCT FROM THE PALLET
Detach the product from the pallet by loosening the
Detach the product from the pallet by loosening the
screws (A) securing it to the latter and located on the
screws (A) securing it to the latter and located on the
feet. Remove the product from the pallet while being
feet. Remove the product from the pallet while being
careful to protect the door and its glass panel from
careful to protect the door and its glass panel from
mechanical impacts which could damage them.
mechanical impacts which could damage them.
SHIFTING THE PRODUCT
The fireplace is equipped with two casters (B) for
facilitating its handling.
Lower the feet by turning them to use the wheels.
After positioning the fireplace, reposition the feet.
The feet are used to distance the fireplace from the
floor and to level the hearth.
They can be adjusted to maximum 10 cm.
A
PLEASE NOTE
If the fireplace is not level there may
be problems with the door's sliding
movement.
B
Advertisement
