Installation - EdilKamin IDROPELLBOX Installation, Use And Maintenance Manual

(Reserved for DEALER)
IDROPELLBOX MUST NEVER BE MADE TO OPERATE WITHOUT WATER IN THE SYSTEM.
MUST BE MADE WITH A PRESSURE OF ABOUT 1.5 BAR.
IT CAN BE DAMAGED IF IT IS IGNITED WITH NO WATER IN THE SYSTEM.
The hydraulic connection must be performed by qualified personnel who can issue a declaration of conformity
according to the Ministerial decree no. 37 ex L.46/90. Reference must however be made to the laws in force in the
individual countries.
Water treatment
Foresees the addition of antifreeze, de-scaling and corrosion substances. In the event that the water used for filling
and toping up has a hardness greater than 35° F, use a water softener. For suggestions please refer to regulation
UNI 8065 (Water Treatment In Heating Systems For Civil Use).
Note on return water temperature.
An appropriate system must be set up to guarantee that the return water temperature does not fall below 45-50 °C.
Incorporated hydraulic kit.
The hydraulic kit incorporated in the boiler-fireplace.
10
HYDRAULIC CONNECTIONS
S: Drain 3/4" male
R: System return 3/4" male
C: Fill/Top up 3/4" male

INSTALLATION

S
R
C
M
INSTALLER
VSP
M: System in 3/4" male
VSP: Safety valve 3/4" female