Table of Contents
Advertisement
Cisco IP Telephony Troubleshooting Guide for Cisco CallManager Release 3.0(1)
The following is the output of the "show call active voice brief" on the Cisco IOS Gateway when
the call is in progress. The called and calling party number and other useful information are also
shown.
R5300-5#show call active voice brief
<ID>: <start>hs.<index> +<connect> pid:<peer_id> <dir> <addr> <state> tx:<packets>/<bytes>
rx:<packets>/<bytes> <state>
IP <ip>:<udp> rtt:<time>ms pl:<play>/<gap>ms lost:<lost>/<early>/<late> delay:<last>/<min>/<max>ms
<codec>
FR <protocol> [int dlci cid] vad:<y/n> dtmf:<y/n> seq:<y/n> sig:<on/off> <codec> (payload size)
Tele <int>: tx:<tot>/<v>/<fax>ms <codec> noise:<l> acom:<l> i/o:<l>/<l> dBm
511D : 156043737hs.1 +645 pid:0 Answer 1001 active
tx:1752/280320 rx:988/158080
IP172.16.70.228:18888 rtt:0ms pl:15750/80ms lost:0/0/0 delay:25/25/65ms g711ulaw
511D : 156043738hs.1 +644 pid:1 Originate 3333 active
tx:988/136972 rx:1759/302548
Tele 1/0/0 (30): tx:39090/35195/0ms g711ulaw noise:-43 acom:0 i/0:-36/-42 dBm
© 2000 Cisco Systems, Inc.
72
Advertisement
Table of Contents
