Table of Contents
Advertisement
1-7. Rearranging the Harness
When the L panel assembly is removed in replacig the
parts, before reattaching the L panel assembly, keep the
harness (CAM MIC) as far away from the fine pitch
coaxial cable.
CN11
far away
1-14 (E)
MB-1022 board
Fine pitch
coaxial cables
Harness (CAM MIC)
1-8. Flexible Card Wire
n
Be careful not to bend the flexible card wires. This short-
ens the wire life.
1-8-1. Removing/Reinstalling the Flexible
Card Wires
Removal
1. Open the connector latch in the direction of arrow A to
release the lock.
2. Remove the flexible card wire in the direction of arrow
B.
Connector latch
Connector
A
Reinstallation
1. Hold the flexible card wire with its insulated surface
(blue) facing upward, and insert it in the direction of
arrow A.
2. Close the connector latch in the direction of arrow B to
lock it.
Connector latch
Insulated surface (Blue)
Flexible card wire
B
Connector
Flexible card wire
B
A
WLL-CA55
Advertisement
Table of Contents
