NetVanta 3000 Series Routers
NetVanta T1/FT1 NIM (P/N 1200862L1)
The T1/FT1 NIM (shown in Figure 9) provides a T1 WAN interface for the NetVanta 3000 Series Routers.
This provides a full T1 or fractional T1 network interface. Refer to Table F on page 49 for the WAN-T1
connector pinout, and Table L on page 51 for the DBU connector pinout. An optional DIM is required for
dial backup applications.
Features and Specifications
Operating Modes
•
T1/FT1 Frame Relay
•
T1/FT1 PPP
T1/FT1 Interface
•
Line Rate:
•
Line Code:
•
Framing:
•
FT1 Line Rate:
•
Input Signal:
•
Line Build-Out:
•
Connector:
•
DS0 Assignment:
Clock Source
•
Network
•
Internal
Diagnostics
•
Test pattern generation and detection: QRSS and 511
•
Network loopbacks (local and remote); responds to both INBAND and FDL loop codes
•
Alarm generation and detection
•
Network and user sets of performance data (15 minute and 24 hour)
Relevant Requirements/Standards
•
EMC - see Electromagnetic Compatibility (EMC) Table on page 5.
•
ACTA/FCC Part 68
•
Industry Canada CS03
•
UL and CUL
•
T1 Interface:
•
ESF Format Interface:
•
ESF Performance Monitoring: TR. 54016 and T1.403
61200860L1-34C
WAN-T1
Figure 9. NetVanta T1/FT1 NIM
1.544 Mbps +/- 75 bps
AMI or B8ZS
D4 (SF) or ESF
DS0 Channelized (multiples of 56/64 kbps)
0 to -36 dB (DS-1)
0, 7.5, 15, 22.5 dB
RJ-48C
Programmable
Pub 62411
TR. 194
© 2003 ADTRAN, Inc.
Hardware Installation Guide
DBU
23