Password Setting - QDI BrillianX 1S/2000 Manual

Chapter 4

Password Setting

When this function is selected, the following message appears at the center of the screen
to assist you in creating a password.
ENTER PASSWORD
Type the password, up to eight characters, and press <Enter>. The password typed now
will clear any previously entered password from CMOS memory. You will be asked to
confirm the password. Type the password again and press <Enter>. You may also press
<Esc> to abort the selection.
To disable password, just press <Enter> when you are prompted to enter password. A
message will confirm the password being disabled. Once the password is disabled, the
system will boot and you can enter BIOS Setup freely.
PASSWORD DISABLED
If you have selected ' System' in ' Password Setting' of ' BIOS Features Setup' menu, you will
be prompted for the password every time the system reboots or any time you try to enter
BIOS Setup.
If you have selected ' Setup' at ' Password Setting' from ' BIOS Features Setup' menu, you will be
prompted for the password only when you enter BIOS Setup.
Manual BrillianX 1S/2000
47