SpeedEasy CPU Setup
The following indicates the options for each item and describes their meanings .
Item
Option
CPU Model
l
CPU Speed
SpeedEasy
l
Jumper
Emulation
Warning:
Do not set CPU frequency higher than its working frequency. If you do, we
will not be responsible for any damages caused.
Figure-3 SpeedEasy CPU Setup
Description
BIOS automatically detects the CPU model,
therefore this item is shown only. It could be
Pentium(R)II or Intel (R) Celeron(TM), depending on
the processor chosen.
CPU frequency should be set according to the CPU
type. For Celeron
side bus) processors, you can choose from
200MHz (66X3), 233MHz(66X3.5), 266MHz (66x4),
300MHz(66X4.5), or 333MHz (66X5). For
Pentium®II processors with 100MHz front-side
bus, you can select from 300MHz(100X3),
350MHz (100X3.5), 400MHz (100X4),
450MHz(100X4.5), or 500MHz(100X5).
This item is only for users who understand
all the CPU parameters, i.e. System Bus Frequency
' 100MHz / 66MHz' and multiplication of Processor
Core Frequency to System Bus frequency "
x3, x3.5, x4, x4.5, x5, x5.5, x6, x6.5, x7,x7.5, x8." .
Manual BrillianX 1S/2000
Chapter 4
TM
or Pentium®II (66MHz front-
x2.5,
33