Advertisement
Photo Imager
8.
Press the Mode Button then use the Selector
Button to advance to the left or right and
select the P option. Press the Function Set
Button to set the P option.
9.
Use the Zoom Button to zoom in and out to
obtain the appropriate image size.
10. Press the Shutter Button halfway to focus.
When the camera focuses it will beep twice.
One or more Green AF frames will appear
where the subject is in focus.
11. Capture the image by pressing the Shutter
Button fully.
12. If the image is too dark, use the Selector
Button to set the ISO value to a higher
number. Press the Function Set Button to
set the higher value. Retake the picture.
To Print an Image
1.
Turn ON the printer. Note: Printer shown here may look
different than shown here.
2.
Push the Controller Button switch to I (on).
3.
Make sure the printer is connected to the camera.
4.
Ensure that the camera is on. Press the Selector
Button to advance the images to the left or right and
find the image to print. Press the Function Set Button.
5.
Press the Selector Button to advance to the Print
option then press the Function Set Button. Printing
will start.
For additional printer instructions, refer to the separate
printer manual.
NOTE: Always change the switch mode back to camera
prior to taking the next picture. USB cable supplied with the
camera must be connected to the side USB port on the
printer.
NOTE: To save images to a computer or for additional camera and printer instructions, refer to the camera
user's guide for further information.
To Operate the Optional LCD Screen
Once the LCD screen is connected to the camera, push the far right button on the LCD panel to operate the
screen.
7
Advertisement
