Advertisement
Photo Imager
Camera Installation
Locate the camera's power input at the side of the camera. Plug the camera's power supply into the camera
and into the wall outlet or surge protector.
Plug the camera USB cable into the camera and the printer. This cable includes a controller button for
switching the camera to printer connection on or off.
To remove the camera from the hood, using the
Allen wrench provided, unscrew the black screw on
the front of the bracket. Use a Phillips head
screwdriver to remove the three screws from the
top of the bracket. Remove the bracket
components for access to the camera.
IMPORTANT! Refer to the system operations section for taking gel images with the camera.
Camera Buttons
1. Power ON/OFF Button (1)
2. Camera Shutter Button (2)
3. Zoom Button (3)
4. Playback Button (4)
5. Selector Button which as navigation capabilities (up, down, left, right) (5)
6. Function Set Button (6)
7. Mode Button (7)
8. Menu Button (8)
9. Memory Card Slider (9)
5
6
3
4
7
Photo Imager's camera bracket
2
1
9
8
5
Use Allen wrench to
remove
Advertisement
