SECTION 3 - MACHINE CONTROLS, INDICATORS AND OPERATION
Alarm
This alarm mounted on the front of the platform control station
will sound for various machine conditions or warnings such as,
system ready chirp or if the machine tilt warning is activated.
Indoor/Outdoor Operation Indicator
The Indoor (GREEN) indicator and the Out-
door (YELLOW) indicator displays which
mode the machine is currently set to oper-
ate in.
Indoor/Outdoor Operation Mode Switch
This button will toggle between the
indoor/outdoor operation modes.
3-18
Low/High Drive Speed
The two position speed switch controls
high or low range drive speed. High speed
would be used in unobstructed open, flat,
and level work areas. Low speed would be
used in close work areas with obstacles,
other machinery or personnel to avoid.
NOTE: Drive speed will automatically be
reduced to low drive when the plat-
form is raised above the stowed position, regardless of
speed switch position.
3121760