Table of Contents
Advertisement
SECTION 3 - MACHINE CONTROLS, INDICATORS AND OPERATION
.
000000
Figure 3-3. MDI Indicator
1. System Fault LED Indicator (RED
LED)
2. Hour-meter/DTC Code Display
3. 100% Battery Charge Indicator
(GREEN AREA)
3-8
4. Battery Charge LOW Indicator
(YELLOW AREA)
5. Battery Re-Charge Indicator
(RED AREA)
NOTE: When more than one DTC exists, each DTC will be dis-
played on the LCD for 3 seconds before changing to the
next DTC. Once the last active DTC is displayed, the display
will recycle indefinitely until the DTC's are corrected.
For DTC's and descriptions, refer to Section 5.8.
Also located on the MDI are Battery Discharge Indicators
(BDI) (items 3, 4 and 5). The (3) GREEN LEDs indicate the level of
charge (voltage) remaining in the batteries.
NOTE: When the battery voltage is low and will need a charge
soon, the YELLOW LED (item 4) begin to flash.
Under normal operating conditions the BDI's and hour-meter
will be displayed. When a DTC exists (other than 00x DTC's) the
BDI LEDs and hour-meter will not be displayed. Also when plat-
form is elevated and the machine is being driven the creep
mode (turtle) is displayed.
3121760
Advertisement
Table of Contents
