Wireless Connection Mode; Ap Hotspot Mode - ZLG CANFDWIFI-100U User Manual

CANFDWIFI-100U
Single-channel CAN (FD) to WIFI converter
You can also change the configuration sent for other tests. No specific demonstration
is made here. Through the preceding simple operation introduction, you can basically
master the simple operations of CANFDWIFI-100U, or you can continue to read and learn
more about CANFDWIFI-100U.

5.5 Wireless Connection Mode

When configuring the wireless connection mode, you are advised to use an Ethernet
wired connection to ensure that the device configuration can be reliably searched (it can
also be configured through a WIFI connection). Connect the device to a 9-48 V DC power
supply. Use a crossover cable to connect the device's LAN port to the PC's network port.
We briefly introduced how to configure the device through the host computer. For detailed
configurations, see 错误!未找到引用源。.

5.5.1 AP Hotspot Mode

AP mode refers to the mode in which CANFDWIFI-100U acts as a wireless hotspot
and accepts connections from other WIFI devices, just like a wireless router. This mode
can be configured by using the configuration software. Run the configuration software to
view the WIFI configuration column, as shown in Figure 5.23:
Figure 5.22 CANFDWIFI-TCP send result
©2021 Guangzhou ZLG Microelectronics Technology Corp.,Ltd.
25
User Manual