Table of Contents
Advertisement
Guangzhou ZHIYUAN Electronics Co., Ltd.
C
h
a
p
t
e
r
4
:
C
h
a
p
t
e
r
4
:
In order to search for the configuration of a device, you are recommended to use the
Ethernet wire connection when configuring the wireless connection mode. The device
should be connected to a 9~24V DC supply and the LAN port of device should be
connected to the network interface of PC via a crossover cable; and the ZNetCom
software (2.82 or later version) should be installed. Double-click the icon of ZNetCom
software to run it (if the system is WIN7 or later version, users should right-click the icon
as administrator), and the interface shown in Figure 4-1appears.
Close the firewall and anti-virus software on the PC. Click the "Search Device", and the
interface shown in Figure 4-2 appears. Users can obtain the device IP address in the
interface. Double-click the searched device to configure it based on the obtained
information.
User Manual
Date: 2017/08/04
High performance 2-channel WiFi-to-CAN Converter
C
W
i
r
e
l
e
s
s
C
W
i
r
e
l
e
s
s
C
Figure 4-1: ZNetCom software interface
CANWiFi-200T User Manual
o
n
n
e
c
t
i
o
n
o
n
n
e
c
t
i
o
n
©2017 Guangzhou ZHIYUAN Electronics
22
M
o
d
e
M
o
d
e
V1.02
Advertisement
Table of Contents
