Table of Contents
Advertisement
CANFDWIFI-100U
Single-channel CAN (FD) to WIFI converter
6. Other Function Description
6.1 Device Reset
There are two ways to reset the device: key reset and software reset.
The button is reset after the user presses the device button and releases it. The
pressing time is less than 2s.
After searching for the device, right-click the device, select [Reset] on the pop-up
interface, and enter the password to complete the reset, as shown in the red box in Figure
6.1. After the device is reset, search again to view the device.
Figure 6.1 Device function display in the network configuration tool
6.2 Restoring Factory Settings
There are two ways to restore factory settings: key and software
After pressing the button for 5 seconds, release the button to restore factory settings.
After the device is searched, right-click the device, select [Restore Factory Settings]
on the pop-up interface, enter the password, and complete the factory restoration, as
shown in the red box in Figure 6.1. Search again to view the device.
6.3 Device Upgrade
Software upgrade firmware: After searching for the device, right-click the device and
choose [Upgrade] on the pop-up interface (as shown in the red box in Figure 6.1). Load
the upgrade firmware on the pop-up interface (as shown in Figure 6.2), and click
[Upgrade].
©2021 Guangzhou ZLG Microelectronics Technology Corp.,Ltd.
32
User Manual
Advertisement
Table of Contents
