Table of Contents
Advertisement
CANFDWIFI-100U
Single-channel CAN (FD) to WIFI converter
Compression
upload
threshold
Compression
upload
timeout
Property
Default
Name
Within the
Filter
specified ID
conditions
(whitelist)
Enable
Disable
Frame
Standard
type
Start ID
End ID
7.2 CANFDWIFI-100U Network Data Format
CANFDWIFI defines the network packet format to realize message transmission.
Table 7.3 lists the packet format, and Table 7.4 lists the packet parameter definitions.
This manual only describes the current basic packet format. The detailed data format
can be obtained from the relevant staff of ZLG Electronics.
128kB
1000
Table 7.2 Filter setting description
Within the specified ID range (whitelist): Frames within the
preset ID range will be received;
range
Beyond the specified ID range (blacklist): Frames within
the preset ID range will not be received.
Select the corresponding item to enable.
Standard frame: Set the filter message type to standard
frame;
frame
Extended frame: Set the filter message type to extended
frame.
Start
ID
of
0
hexadecimal notation
End ID of the filtered message, expressed in hexadecimal
0
notation
Table 7.3 Network packet format
©2021 Guangzhou ZLG Microelectronics Technology Corp.,Ltd.
compressed and uploaded after the data
reaches the maximum compression value or
times out.
Real-time
mode:
immediately after receiving the data (not
recommended)
Compression upload threshold. When CAN
(FD) data reaches this threshold, it will be
uploaded to the server after compression.
If the size of the cached data does not reach
the threshold, the data will be compressed
and uploaded when the receiving time
reaches this value. The unit is ms.
Parameter Description
the
filtered
message,
41
User Manual
Upload
the
data
expressed
in
Advertisement
Table of Contents
