Canfdwifi-100U Communicating With The Usbcanfd-200U - ZLG CANFDWIFI-100U User Manual

Single-channel can(fd) to wifi converter
Table of Contents

Advertisement

CANFDWIFI-100U
Single-channel CAN (FD) to WIFI converter
After all configuration changes are completed, enter "88888" in the attribute value of
[Current Password] in [Password Operation], and click [Submit Changes].

5.4 CANFDWIFI-100U Communicating with the USBCANFD-200U

We need a device equipped with a CAN port to demonstrate how the
CANFDWIFI-100U device realizes bidirectional transparent conversion of CAN network
data and Ethernet data. Here, select the USBCANFD-200U interface card, which is
convenient to use. Its related information is available at http://www.zlg.cn.
First, use a network cable to connect the CANFDWIFI-100U device to the PC, and
use a twisted pair to connect the CAN port of the CANFDWIFI-100U device to the CAN0
of the USBCANFD-200U interface card (CANH is connected; CANL is connected;
configure a 120 ohm terminal resistance ). Connect the USBCANFD-200U interface card
to the PC with a USB cable. Connect the USBCANFD-200U interface card to the
CANFDWIFI-100U device. Start the ZCANPRO host computer on the PC. Select
USBCANFD-200U as the device type, as shown in Figure 5.9:
Figure 5.8 CAN(FD) to network configuration interface
©2021 Guangzhou ZLG Microelectronics Technology Corp.,Ltd.
17
User Manual

Advertisement

Table of Contents
loading

Table of Contents