CANFDWIFI-100U
Single-channel CAN (FD) to WIFI converter
wireless routers as a client to realize wireless access to the network. To use this function,
you must first know the wireless network name (SSID) of the connected router or other AP
hotspot, wireless channel, encryption method and key (if there is no encryption, no
password is required), wireless channel, encryption method and key (if there is no
encryption, no password required). Figure 5.25 shows the wireless configuration of a
wireless router.
We can configure CANFDWIFI-100U by configuring the host computer. As shown in
Figure 5.26, enter the wireless information of the router in the corresponding window. After
the settings are changed, restart the device. When working normally, CANFDWIFI-100U
can actively connect to the router with the SSID "USBCAN".
5.6 Working Mode
Configure the device into different working modes by configuring the host computer,
as shown in Figure 5.27:
Figure 5.25 Wireless router configuration
Figure 5.26 Configuring the Station mode
©2021 Guangzhou ZLG Microelectronics Technology Corp.,Ltd.
27
User Manual