Device Logs - ZLG CANFDWIFI-100U User Manual

CANFDWIFI-100U
Single-channel CAN (FD) to WIFI converter
After the upgrade firmware is successfully transferred, we can see the following interface:
The device receives the firmware and starts to back up the firmware. The three
indicators (SYS, CAN, WIFI) of the device start flashing green at the same time. When the
SYS indicator flashes again, the entire firmware upgrade process is complete.
Note: During the device upgrade, do not restart the device or disconnect the power.

6.4 Device Logs

Device logs are used to analyze device operation. After searching for the device,
right-click the device and choose [Device Log] to obtain the logs. See Figure 6.3.
Figure 6.2 Device upgrade interface
Figure 6.3 Obtaining device logs
©2021 Guangzhou ZLG Microelectronics Technology Corp.,Ltd.
33
User Manual