Air Line Accessories - Graco Fire-Ball 226-012 Instructions-Parts List Manual

Air Line Accessories

See page 11 for recommended air accessories and
installation.
Models 225–773 & 225–827 (Fig. 2)
1. Model 225–773 only: Assemble the truck as shown
in the parts drawing on page 15. Secure the truck
pail (5) to the truck base with the pointed hold
down clamps (3c) and thumbnuts (3d).
All models:
2. Remove the fluid outlet adapter included with the
pump and screw the holster (6) into the pump
outlet, using thread sealant.
3. Remove the cover from the pail of lubricant. Place
the pail of lubricant into the truck pail.
4. Secure the cover (4) on the pail with the three
thumbscrews (A).
5. Insert the pump riser tube through the top of the
cover (4). Lower the pump until it rests on the
cover.
6. Assemble the gun (2b) and hose (2a), and then
connect the hose to the pump fluid outlet.
7. Connect the nipple (2d) to the pump air inlet.
Connect the quick disconnect coupler (2c) to the
air supply hose.
Installation
2b
4
5
Fig. 2
2c, 2d
3c, 3d
6
2a
A
01514
307–878