Installing Mass Storage Devices - HP Kayak XA05 User Manual

ashaki.bk : ashak-2.fb4 Page 25 Wednesday, July 15, 1998 6:13 PM
On selected models, a 16-bit
External 68-pin SCSI
connector
On selected models, a 16-bit
SCSI cable with four 68-pin
connectors.

Installing Mass Storage Devices

Connecting Devices
If you add an IDE Zip drive, hard disk drive, CD-ROM drive, CD-RW
drive, or tape drive, you need to connect it to power and data cables.
The data cables and connectors provided are shown below:
34-pin connector
Two IDE data cables each with two 40-pin
connectors for IDE Drives, such as CD-ROM
Drives, Zip Drives or Hard Disk Drives.
2 How to Install Accessories In Your HP PC Workstation
Installing Mass Storage Devices
40-pin connector
Cable with one connector for
3.5-inch Floppy Disk Drive
40-pin connector
Power Cables for Hard Disk
Drives, Zip Drives, Tape Drives,
CD-RW, and CD-ROM Drives
Power Cable for 3.5-inch
Floppy Disk Drive
English 25