HP Kayak XA05 User Manual page 30

ashaki.bk : ashak-2.fb4 Page 22 Wednesday, July 15, 1998 6:13 PM
Align the back of the cover
with the inner back edge of
the PC Workstation's case.
2 How to Install Accessories In Your HP PC Workstation
Removing and Replacing the Cover
Replacing the Cover
1 Ensure that you have installed all your accessories and that all
internal cables are properly connected and safely routed.
2 Lower the cover completely onto the computer (aligning the back of
the cover with the inner back edge of the PC Workstation's case),
and firmly slide it backwards into place. Ensure that the retaining
latches click into position.
Ensure that the retaining
latches on either side of
the PC Workstation's
case click into position.
3 If required, lock the cover using the key provided.
4 Reconnect all the power cables and telecommunications cables.
22 English