How To Install Accessories In Your Hp Pc Workstation - HP Kayak XA05 User Manual

ashaki.bk : ashak-2.fb4 Page 21 Wednesday, July 15, 1998 6:13 PM
WARNING
Removing and Replacing the Cover
For your safety, never remove the PC Workstation's cover without first
removing the power cord from the power outlet, and any connection to
a telecommunications network. Always replace the cover on the
PC Workstation before switching it on again.
Removing the Cover
1 Switch off the display and computer.
2 Disconnect all power cables and any LAN or telecommunications
cable.
3 If necessary, unlock the cover using the key on the back panel, and
remove any floppy diskettes from the floppy drive.
4 Push the two latches on the sides of the computer upwards.
5 Grasp the cover on both sides of the computer, and carefully slide it
forwards and off the computer.

2 How to Install Accessories In Your HP PC Workstation

Removing and Replacing the Cover
English 21