ashaki.bk : ashak-2.fb4 Page 23 Wednesday, July 15, 1998 6:13 PM
WARNING
Moving the Power Supply
You can move the power supply unit out of the computer to improve
access to the system board and the cables at the rear of the disk drives.
1 Disconnect the computer's power cord and any LAN cable.
2 Remove the computer's cover (refer to page 21).
3 Lift the front of the power supply up and move it forwards to
disengage the hinge on the rear.
Lift the front of
the power supply
up and forwards.
4 Rotate the power supply and lay it upside down on the drive unit.
To avoid electrical shock, do not open the power supply. There are no
user-serviceable parts inside the power supply unit.
2 How to Install Accessories In Your HP PC Workstation
Moving the Power Supply
English
23