HP Kayak XA05 User Manual page 20

ashaki.bk : ashak-1.fb4 Page 12 Wednesday, July 15, 1998 6:13 PM
CAUTION
1 Setting Up and Using Your HP PC Workstation
Starting and Stopping Your PC Workstation
To initialize your software:
1 Turn on the display first, and then the PC Workstation.
When the PC Workstation is switched on, the HP PC Workstation's
logo is displayed. The PC Workstation performs a Power-On-Self-
Test (POST).
2 The software initialization process starts. It displays the software
license agreement, gives you an opportunity to read Working in
Comfort (ergonomic advice for computer users), and then asks
questions about the PC Workstation.
3 While the initialization process is running, you can complete the
Warranty Registration card that came with this manual.
4 When the initialization process has finished, click OK and the
PC Workstation will restart.
Creating an Emergency Repair Disk
During the initialization of your software, it is very important that you
create an Emergency Repair Disk for the operating system, when
prompted. HP recommends that you use new diskettes for this
purpose.
For more information on how to create these diskettes, refer to the
documentation that came with your application software or operating
system.
Stopping Your PC Workstation
To stop the PC Workstation, first make sure that you have exited all
applications and then use your operating system's shutdown command
in the menu. When prompted, press the power button on your
Start
PC Workstation's control panel.
Do not use the power button until prompted to do so as you may lose
any unsaved data from open applications.
12 English