Hilti HDE 500-A12 Manual page 26

3 Description
3.1 Overview 1
3.2 Intended use
The product is designed to dispense the contents of Hilti foil packs and cartridges in a controlled operation.
The HDE 500­A12 cordless dispenser is designed exclusively for use with Hilti 330 ml or 500 ml foil packs
and 580 ml cartridges.
The product can be used with either a foil pack holder or a cartridge:
Use only Hilti Li-ion batteries of the B12 series with this product. For optimum performance, Hilti
•
recommends the batteries stated in the table at the end of these operating instructions for this product.
• For these batteries, use only Hilti chargers of the type series stated in the table at the end of these
operating instructions.
3.3 Items supplied
Dispenser and operating instructions
Other system products approved for use with this product can be found at your local Hilti Store or at:
www.hilti.group
3.4 Charge state display
The charge state of the Li­ion battery is displayed after pressing one of the release buttons lightly (press only
until slight resistance is felt).
Status
4 LEDs show.
3 LEDs show.
2 LEDs show.
1 LED shows.
18 English
Front locating lug for installation of the foil
@
pack holder / cartridge
Cradle for the foil pack holder / cartridge
;
Rear locating lug for installation of the foil
=
pack holder / cartridge
Dispensing mode selector switch
%
Parallel piston rods with grip
&
Release button
(
Grip
)
Battery
+
Battery release buttons (also used to activate
§
the charge status indicator)
Trigger
/
Accessories
Foil pack
:
Foil pack holder, black
∙
Foil pack holder, red
$
Cartridge
£
Meaning
Charge state: 75 % to 100 %
Charge state: 50 % to 75 %
Charge state: 25 % to 50 %
Charge state: 10 % to 25 %
2330324
*2330324*