Mounting X And Y Axes In-Line With Hole Pattern; Mounting X Axis In-Line With Hole Pattern - THORLABS PY004 User Manual

3.2.1 Mounting X and Y Axes In-Line with Hole Pattern

Mounting Point

3.2.2 Mounting X Axis In-Line with Hole Pattern

CL Series
Clamp
Rev F March 2021
Y In Line
X In Line
Fig. 3.1 Mounting Both Axes In-Line with Hole Pattern
Y Off Centre
Fig. 3.2 Mounting X Axis In-Line with Hole Pattern
Chapter 3 Installation and Operation
Mounting Point
Mounting Point
X In Line
Page 5