Mechanical Design - HP Deskpro EX Technical Reference Manual

Chapter 2 System Overview
2.3

MECHANICAL DESIGN

Compaq Deskpro EX Series models are available in two form factors:
Desktop (DT) – a low-profile ATX-type desktop providing expandability.
Minitower (MT) – an ATX-type unit providing the most expandability and being adaptable to
desktop or floor-standing placement.
The following subsections describe the mechanical (physical) aspects of the Compaq Deskpro EX
Series models.
CAUTION: Voltages are present within the system unit whenever the unit is plugged
into a live AC outlet, regardless of the "Power On" condition. Always disconnect the
!
power cable from the power outlet and/or from the system unit before handling the
system unit in any way.
NOTE: The following information is intended primarily for identification purposes
only. Before servicing these systems refer to the applicable Maintenance And
Service Guide. Service personnel should review training materials also available on
these products.
2-4 Compaq Deskpro EX Series of Personal Computers
First Edition – August 2000