Mechanical Design - HP Compaq dc7600 MT Technical Reference Manual

System Overview

2.3 Mechanical Design

This guide covers five form factors:
■
Ultra Slim Desktop (USDT)—Very slim design that can be used in a tradition desktop
(horizontal) orientation or as a small tower mounted in the supplied tower stand.
■
Small Form Factor (SFF)—A small-footprint desktop requiring minimal desk space.
■
Slim Tower (ST)—Slim design that can be used in a tradition desktop (horizontal)
orientation or as a small tower mounted in the supplied tower stand.
■
Convertible Minitower (CMT) —an ATX-type unit providing the most expandability and
being adaptable to desktop (horizontal) or floor-standing (vertical) placement.
The following subsections describe the mechanical (physical) aspects of models.
Ä
CAUTION: Voltages are present within the system unit whenever the unit is plugged into a live AC outlet,
regardless of the system's "Power On" condition. Always disconnect the power cable from the power
outlet and/or from the system unit before handling the system unit in any way.
✎
The following information is intended primarily for identification purposes only. Before servicing these systems,
refer to the applicable Service Reference Guide. Service personnel should review training materials also
available on these products.
2-4 www.hp.com Technical Reference Guide