Bezel Blank - Compaq Deskpro EX User Manual

4.5

Bezel Blank

1. Prepare the computer for disassembly (Section 4.2).
WARNING: Power is continuous to the system board and power supply even when the power
switch is turned off. To prevent damage to the unit, disconnect the power cord from the power
source or the unit before beginning disassembly procedures.
2. Remove the computer cover (Section 4.3) and lay it down on its top on a soft, protected
surface.
3. Push the two snaps 1 down to release from the bezel blank tabs.
4. Remove the bezel blank 2.
To install a bezel blank, reverse the removal procedure.
Compaq Deskpro EX Series of Personal Computers 4-5