Removal And Replacement Procedures; Disassembly Sequence Chart - Compaq Deskpro EX User Manual

4
chapter
R
EMOVAL AND
This chapter provides general service information for the computer. Adherence to the
procedures and precautions described in this chapter is essential for proper service.
After completing all necessary removal and replacement procedures, run the Diagnostics
utility to verify that all components operate properly.
4.1

Disassembly Sequence Chart

Use the chart below to determine the disassembly sequence for removing components
from the computer.
4.3 Computer Cover
4.4
4.5
4.6
4.7.1
4.7.4
4.8
4.9
4.10
4.11
4.12
4.13
4.14
4.15
These steps are interdependent.
R
EPLACEMENT
Front Bezel
Bezel Blank
Power/LED Switch
Removing the Internal Side-Mounted 3.5-Inch Hard Drive
4.7.2 Removing an External 5.25-Inch Drive from Right Drive Bay
4.7.3 Removing the Diskette Drive
Removing an External 3.5-Inch Drive from Left Drive Bay
System Memory
Removing an Expansion Board
Graphics Cards
Processor
System Board
Lithium Battery
Power Supply
Chassis Fan
P
ROCEDURES
Compaq Deskpro EX Series of Personal Computers 4-1