Front Bezel - Compaq Deskpro EX User Manual

4.4

Front Bezel

1. Prepare the computer for disassembly (Section 4.2).
WARNING: Power is continuous to the system board and power supply even when the power
switch is turned off. To prevent damage to the unit, disconnect the power cord from the power
source or the unit before beginning disassembly procedures.
2. Remove the computer cover (Section 4.3) and lay it down on its top on a soft, protected
surface.
3. Remove the five screws connecting the front bezel to the computer cover.
When removing the front bezel from the computer cover, the computer cover quick
release buttons may fall out.
4. Press the two tabs down 1 and the two side quick release buttons in 1.
5. Remove the front bezel from the computer cover 2.
When replacing the front bezel, be sure to reinstall the computer cover quick
release buttons
To replace the front bezel, reverse the above procedure.
4-4 Removal and Replacement Procedures