4.10.5
Standard AGP Expansion Card
Removing an AGP Card
1. Prepare the computer for disassembly (Section 4.2).
WARNING: Power is continuous to the system board and power supply even when the power
switch is turned off. To prevent damage to the unit, disconnect the power cord from the power
source or the unit before beginning disassembly procedures.
2. Remove the computer cover (Section 4.3).
3. Remove the screw at the top of the expansion slot.
4. Remove the AGP graphics board as you would any PCI expansion board
(Section 4.9.2).
AGP card may differ from illustration.
Compaq Deskpro EX Series of Personal Computers
4-23