Test Mode - CAS RW-2601P Series Manual

5. Test Mode

(1) How to enter
Press the "ON/OFF" key while pressing the
(2) Available keys
Key
:
Change the set value. Used to increase the set value + 1.
Key
:
Change the digit of the set value. Used to increase the set value ×10.
Key
:
Move to the next menu.
(3) Test Menu(TEST 1 - TEST 5)
Test 1 : Key Test
Test 2 : LCD Display Test
Test 3 : Load Cell Test and A/D conversion test
Test 4 : Serial Interface / Printer Test(RS-232)
TEST 1
FUNCTION : Key test
Key
ENTER key :
Move to the next
menu.
Other key :
Perform test.
Display
TEST 1 condition.
Press the key to be test and the
tESt 1
No of key mode should be identify
Key number
with code of key.
ex)In case of Zero key
1
If you press Enter key, it will be moved to
test 2.
11
key, and TEST menu starts.
Description