Test Mode - CAS NC-1 Series Manual

4. UNIT CONVERSIONS
■ Place an item to be weight on the hook.(KILOGRAM MODE)
■ Remove weight on the hook.
■ Press "kg/lb" key.(POUND MODE)
■ Place an item to be weight on the hook.

TEST MODE

How to enter TEST Mode
■ Pressing the key for 2 seconds in the normal mode, enter the test
mode with display the message
to execute the test mode.(test2~5 is same sequence.)
I f press the key in the test mode, test mode is ended and then enter the normal mode.
(Ref. You can't enter the test mode while in the state of Hold or Tare.)
Press the key or
12
key