Test Mode - CAS NC-1 Series Owner's Manual

4. UNIT CONVERSIONS
Place an item to be weight on the hook.(GRAM MODE)
Remove weight on the hook.
Press "kg/lb" key.(POUND MODE)
Place an item to be weight on the hook.

TEST MODE

How to enter TEST Mode
Pressing the key for 2 seconds in the normal mode, enter the test
ZERO
mode with display the message
to execute the test mode.(test2~5 is same sequence.)
I f press the key in the test mode, test mode is ended and then
enter the normal mode.
(Ref. You can't enter the test mode while in the state of Hold or Tare.)
12
lb
Press the key or key
Test menu ( tESt 1~5)
: Display Test
: Load Cell and A/D Conversion Test
: The IC(CPU) Temperature Test
: Battery Test
: Key Test
Available keys
KEYS
Exit Test mode and then enter the Normal mode
ZERO
Use the backlight(only TEST 1)
Move the next menu and then execute TEST Mode
or
TEST 1
FUNCTION : LCD TEST
KEYS LCD SCREEN
Backlight
ZERO
execute
test 1
TEST 2
FUNCTION : Load Cell and A/D Conversion TEST
KEYS
LCD SCREEN
or
: execute test 2
FUNCTIONS
DESCRIPTION
Display TEST 1 state
Display all digits on the screen
DESCRIPTION
Display TEST 2 state
Display the digital value
Corresponding to current weight
13