Subscribe to Our Youtube Channel
Related Manuals for CAS SW-2
Summary of Contents for CAS SW-2
-
Page 1: Table Of Contents
CONTENTS PRECAUTIONS PREFACE NAMES AND FUNCTIONS OPERATIONS 1. General Weighing 2. Weighing with Tare 3. How to Convert the Unit of Weight 4. How to Set Auto Power Off BATTERY SYSTEM ERROR MESSAGE SPECIFICATIONS... -
Page 2: Precautions
Do not overload beyond the maximum electricity static. This will minimize When any damage or defect occurs, weight limit. defect or electric shock. contact your CAS authorized dealer immediately for proper repair. Do not pull the plug by its cord when... - Page 3 Internal mechanism could be damaged. moving. Do not hold by the platter. CAS authorized dealer. Take the battery out when scale is not in Place the scale on firm and temperature By adjusting 4 corners of the scale, set use for long time.
-
Page 4: Preface
PREFACE Thank you for purchasing our CAS SW Series. This scale has been designed with CAS reliability, under rigid quality control and with outstanding performance. Your specialty departments can enjoy these high quality reliable CAS products. We believe that your needs will be satisfied and you will have excellent reliability. -
Page 5: Operations
FUNCTION KEYS FUNCTIONS ZERO Used to set the zero point. TARE Used to enter a tare weight and used to cancel a tare weight. UNIT Used to convert the unit of weight. Turn on and off the display. OPERATIONS Turn on the display by pressing ON/OFF key. Then the display will show all the segments and count up "0"... -
Page 6: Weighing With Tare
2. Weighing with Tare Tare is the weight of container being used for a commodity. The TARE key subtracts the weight of the container. ZERO TARE UNIT Place a container on Press the TARE key. Place a commodity in the the platter. -
Page 7: How To Set Auto Power Off
4. How to Set Auto Power Off Auto-Power off makes the battery's life longer. When you don't operate the scale, this function makes the power OFF automatically. Before setting the Auto Power Off, make sure that the power is OFF. ZERO TARE ZERO... -
Page 8: Error Message
ERROR REASONS SOLUTIONS Err 1 An error of the initial zero range Set the platter empty Refer to specifications An overload SPECIFICATIONS MODEL SW-2 SW-5 SW-10 SW-20 5 0.002lb 10 0.005lb 20 0.01lb 50 0.02 lb CAPACITY 2 0.001kg 5 0.002kg 10 0.005 kg 20 0.01kg...
Need help?
Do you have a question about the SW-2 and is the answer not in the manual?
Questions and answers