Copying An Id Card - Canon imageCLASS MF5950dw Basic Operation Manual

Copying an ID Card

Copy a 2-sided card onto one side of paper.
Keys to be used for this operation
COPY
1
Place a card on the platen glass, and then close
the feeder.
Place the card with spacing of 1/4" (5 mm) from the left edge of the
platen glass.
Align the center of the card with the arrow mark, as shown below.
To place the card
horizontally
To place the card vertically
2
Press [ ].
3
Select <N on 1> using [ ] or [ ] and press [OK].
Copy: Press Start
100% LTR
1
Copy Ratio: 100% Di
Paper: LTR:Plain
1
N on 1: Off
4
Select <ID Card Copy> using [ ] or [ ] and press
[OK].
N on 1
Off
2 on 1
4 on 1
ID Card Copy
OK Start
A4
B4
A5
A5
B4
A4
A4
B4
A5
A5
B4
A4
1
...
5
Press [ ] (Start).
Proceed to the next step when the scan is complete.
6
Turn sides.
Place the card with spacing of 1/4" (5 mm) from the left edge of the
platen glass.
Align the center of the card with the arrow mark, as shown below.
To place the card
horizontally
To place the card
vertically
7
Press [ ] (Start).
NOTE
To place your document (card) on the platen glass
Place the card on the left half of the platen glass.
Copy ratio
The copy ratio is automatically set to <100%>.
Supported paper sizes
Sizes larger than A4/Letter.
A4
B4
A5
A5
B4
A4
A4
B4
A5
A5
B4
A4
3-9