Copying Id Card - Canon imageCLASS MF4370dn Basic Operation Manual

Multiple Documents onto One Sheet (2 on 1)
Press
2
Press
3
to select <2 ON 1>, then press [OK].
C O L L A T E / 2
– If you want to use <2 ON 1> and "Collating
Copies" (see p. 4-13) at the same time, select
<COLLATE+2 ON 1>, then press [OK].
– If you want to use <2 ON 1> and the 2-sided
copying at the same time, go to step 3 of "1 to
2-Sided Copying" (see p. 4-19), "2 to 2-Sided
Copying (MF4380dn Only)" (see p. 4-20) or "2
to 1-Sided Copying (MF4380dn Only)" (see
p. 4-21).
Use –
4
desired copy quantity (1 to 99).
6 3 %
Press [Start].
5
– If you want to copy multiple documents using
the platen glass, place a document and press
[Start] once for each page. When scanning
is complete, press [OK].
– To cancel all settings, press
– A maximum of 1/8" (4 mm) margin will be
produced between the two reduced
documents in 2 on 1 copying.
4-16
[COPY].
[Collate/2 on 1] repeatedly
O N 1
2 O N
[numeric keys] to enter the
* L T R
T E X T / P H O T O
[Stop/Reset].

Copying ID Card

Copying ID Card

You can make a copy of a 2-sided card onto one
side of a paper. This mode is useful when copying ID
cards.
1
– You must place a document on the platen glass when using
this function.
– The zoom ratio will automatically be set to <100%> with this
feature. You cannot change the copy size.
– The paper size you can use is LTR or A4. If you select other
paper size in the paper size setting, the ID card copy function
will be canceled automatically.
– When you select the ID card copy, the other copy settings you
made, such as the copy ratio and paper size, will be canceled
automatically.
– This function cannot be used with the 2 on 1 mode, the
collating mode, or the 2-sided copying mode.
Place a card on the platen glass.
1
– Place a card as indicated below.
1
– Align the center of a card with the arrow
mark.
Press
2
Press
3
to select <ID CARD COPY>, then press
[OK].
C O L L A T E / 2
[COPY].
[Collate/2 on 1] repeatedly
O N 1
I D C A R D C O P Y