Setting Menu List; Print Reports; Address Book List - Canon imageCLASS MF5950dw Basic Operation Manual

Setting Menu List

Printing a User Data List
To see the contents of current settings, print out user's data list.
Keys to be used for this operation
1
Press [ ] (Report).
2
Select <Print Reports> using [ ] or [ ] and press
[OK].
Reports
Reports Settings

Print Reports

Contents of the Setting Menu
[Address Book] key
Register the following types of destination.
- One-touch keys
- Coded dialing
- Group dialing
Viewing the Route Map
This area represents the first hierarchy in the menu.
Time&Date Settings
Date Display Type
This area represents hierarchies for "setting item."
About the menu options in the following chart
• The settings marked with "*
• The settings marked with "*
• For values with "*
• The settings marked with "*
10-2
Report
OK
[Select Paper/Settings] key
Register the size and type of the
paper to be used.
You can also register a custom paper
size.
Timer Settings
P.1-12
YYYY MM/DD
MM/DD/YYYY
DD/MM YYYY
These represents reference areas in this manual.
For the items with the icon, see the e-Manual.
1 " are only for MF5950dw.
" are only for MF5960dn.
2
" mark, the default value varies depending on the country where you are using the machine.
3
4 " cannot be imported or exported via the Remote UI.
3
Select <User Data List> using [ ] or [ ] and
press [OK].
Print Reports

Address Book List

User Data List
System Manager Data
Communication Manag
4
Make sure that paper is loaded in the paper
source and press [OK].
Load the displayed paper size.
Supported Paper:
Size: A4, LTR
Type: Pln, Rec, Clr
5
Select <Yes> using [ ] and press [OK].
Printing starts.
Print User Data
List?
Yes
6
Press [
screen.
[Menu] key
Configure the machine settings.
You can perform adjustment and
cleaning.
Menu Operations
Returns to the previous hierarchy.
Proceeds to the next hierarchy.
Selects an upper item/setting value.
This area represents
hierarchies for "setting values." Selects a lower item/setting value.
The setting values with the
Proceeds to the next hierarchy. Also, a setting
gray background or of the
boldface represents the default
value is determined, and an operation is performed.
settings.
* When <Apply> appears in the screen, you need to select <Apply>
and press [OK] after specifying the setting.
Back
Returns to the previous hierarchy.
Resets the settings. (Resets the copy/scan/fax/USB
Reset
direct print mode.)
Press [ ] (Menu) to exit the menu screen and return to the default screen.
. . .
. . .
OK
No
] (Report) to close <Print Report>
[Report] key
You can specify the settings for
various report output conditions and
output a report.