Registering And Editing A Coded Dial Code Using The Remote Ui - Canon imageCLASS MF5950dw Basic Operation Manual

Registering and Editing a Coded Dial Code
Using the Remote UI
1
Start the Web browser.
2
Enter "http://IP address of the machine/" in
the address field and press the [ENTER] key on
keyboard.
Input Example: "http://192.168.0.215/"
3
Log on to the Remote UI.
(1) Select [Management Mode].
(2) Enter [System Manager ID] and [System Manager PIN].
(3) Click [Log In].
(1)
4
Click [Address Book].
5
Click [Coded Dial].
5-8
(2)
(3)
To register a coded dial
Proceed to Step 6.
To edit the registered coded dial
(1) Click [No.], [Type] or [Name].
(2) Click [Edit].
(3) Specify the required settings in the edit screen and click [OK].
To delete the registered coded dial
(1) Click [Delete] of the destination which you want to delete.
6
Click the unregistered [No.], [Type] or [Name].
7
Select [Destination Type to Register] and click
[OK].
8
Specify the required settings and click [OK].